Setting Options

There are 8 sections in this window for you to set up conversion options.

• General
• WAV
• MP3
• MIDI
• AMR
• MMF
• 3GP
• AAC & MP4

General

• Default Outpu Directory- Choose your favor output directory;
• When Output file exists - Auto rename, Skip or Overwrite;
• Open output directory when done - When the operation finish, the software will show you where the output files placed.
• CD-ROM Rip Speed - Set current speed of drive;

WAV Settings

• Sample Rate - output sample rate;
• Bit depth - output quantization bit length;
• Channels - Channel selection:

Automatic

• Left Channel: output left channel only
• Right Channel: Output right channel only
• Mono: Mix left and right channels for monaural output
• Stereo: Force stereo output
• Adjust attenuation - override per-file volume adjustments;

MP3 Settings

• Quality - Use built-in preset;
• ReSample Rate - Set the samplerate of the output mp3 files;
• Bitrate - Set the constant bitrate of the output mp3 files or the min bitrate of the VBR;
• Copyright - Mark the encoded file as being copyrighted;
• Private - Mark as private mp3;
• Original - Mark the encoded file as being a original;
• CRC - Turn on CRC error protection;
• Enable VBR - Used to turn on the VBR of Lame encoder and specifies the value of VBR quality.

MIDI Settings

• Pitch Determination Method - FFT, Sensor or Advanced Sensors;
• Pitch Time Tick - The Minimal amount of time, time resolution, Note durations & start times are whole numbers of timetick;
• Bass Shift - Relative amount of time to shift bass notes forward or backward;
• Note Determination Method - Local(Old) and Peak(New);
• Min Note Duration - Minimal duration of a note in ms.

AMR Settings

• Quality - Specifies the value of AMR quality;
• Use Channel - Select a channel for converting to AMR.

MMF Settings

• Saving restriction - Whether to make the saving restriction to a mobile phone is set. When checked, the saving is enabled;
• Transfer - Whether to make the secondary transfer from a mobile phone to a mobile phone is set;
• Sampling Frequency Setting - Set the sampling frequency for storing WAVE data into SMAF.
• When MP3/WAVE is longer than 66 seconds, only the top to about 66 seconds is output into MMF(SMAF).

3GP Settings

• Sample - Set the samplerate of the output 3GP files;
• Channel - Set the output channel, Only Mono and Stereo supports.
  

AAC/MP4 Settings

• Bandwidth - Set the bandwidth in Hz;
• Average bitrate (ABR) - Set average bitrate (ABR) to approximately the selected value;
• VBR Quality - Set default variable bitrate (VBR) quantizer quality in percent.